Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: AE/020112, total width: 1,300 mm, overall weight: 2,750 kg, number of rollers: 4, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Overall width: 1,300 mm Electrical data Rated voltage: 400 V Frequency: 50 Hz Phases: 3 ~ Rated current: 180 A Short-circuit current: 10 kA Hsdpfx Afoxmhiwsijfn Max. load current: 420 A Weight: 2,750 kg EQUIPMENT Two rollers at the top Two rollers at the bottom Note: The machine was dismantled as part of a liquidation and is loaded onto a truck. The machine was fully operational at the time of dismantling.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, edge thickness (max.): 20 mm, controller model: IMATRONIC 121/01, TECHNICAL DETAILS Edge thickness, coil: 0.3 – 3 mm Edge thickness, strips/sheared pieces: 0.8 – 20 mm Panel thickness: 8 – 60 mm Motorised chain feed from below (variable): 6 – 30 m/min MACHINE DETAILS Electronic control: IMATRONIC 121/01 EQUIPMENT Levelling unit with NC adjustment 08.376: (4.5 kW × 2 at 9,000 rpm) Edge heating lamps: 1.5 kW × 2 Glue unit 283.1513: (hot-melt glue + preheater) with NC adjustment Glue unit 08.42: (0.66 kW × 2 at 12,000 rpm) Profiling group 08.0555: (1.85 kW × 2 at 12,000 rpm) Multifunctional unit 08.348: (0.66 kW × 2 at 12,000 rpm) Corner copy routers 08.519 Glue scraper group 08.50 Brushing unit 08.612: (0.25 kW × 2 at 1,500 rpm) Unit 08.181: (4.4 kW × 1 at 6,000 rpm) Belt sanding unit 08.062: (1.8 kW × 1 at 3,000 rpm) Upper pressure system with motorised rubber belt Entry fence with NC adjustment Hfodpfx Aoxf Ewvjfisn Pressure zone Roll holder with 1 roll Automatic end trimming tool change (cross system)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,680 x 1,260 x 150 mm Milling motor: 1 unit, 8.5 kW (11.5 HP) Tool changer: 1 automatic rotary magazine with 12 positions Hjdpfx Aexg Izaofiefn Drill beam: 18 vertical, 8 horizontal drills, and 1 "X" saw drill Software: DXF compatible Safety standard: BUMPER protection, CE standards Weight: 3,000 kg Note: The machine has a software issue and does not include a pump. The estimated cost for correction is approximately €3,000 each.

Condition: ready for operation (used), functionality: fully functional, workpiece length (max.): 7,500 mm, workpiece diameter (max.): 1,500 mm, No minimum price – guaranteed sale to the highest bidder! Auction of a complete sawmill including sharpening workshop! TECHNICAL DETAILS Max. log diameter: 1.5 m Max. log length: 7.5 m Automatic separator: RG SX Resaw: 1,300 RG Trimmer: NO/5 single-blade EQUIPMENT Primultini model 460 sharpening machine for bandsaw blades Primultini bandsaw blade beveling machine Vollmer sharpening machine Bandsaw blade end-welding device Additional sharpening machine Hjdexgg Skopfx Afisfn Many saws

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: AH00000267, overall weight: 3,000 kg, Equipment: CE marking, MACHINE DETAILS Electrical Data Rated voltage: 400 V Rated current: 37.5 A Frequency: 50 Hz Hedpjxmguxsfx Afiefn Weight: 3,000 kg EQUIPMENT CE marking

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: V001257, Profi-Joint Shaper 6000mm two stage press Includes PUR glue pump and applicator Additional consideration: Sawdust extraction (A$20,000) Hfsdpjv Ryb Refx Afion

Condition: new, Year of construction: 2025, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer Hfjdpfsq Igyvsx Afion A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 021.06.440, cutting length (max.): 4,400 mm, main saw diameter: 380 mm, controller model: G-DRIVEAXS BASIC, working height: 1,050 mm, Equipment: scorer, TECHNICAL DETAILS Cutting length: 4,400 mm Cross-cutting machine width: 1,525 mm Saw blade protrusion: 105 mm Main blade diameter: 380 mm Scoring blade diameter: 180 mm Lift table dimensions: 4,400 mm × 1,600 mm Hfedpfx Ajxf Eg Djfien Working height: 1,050 mm Minimum book height: 10 mm Minimum thickness when loading: 10 mm Minimum panel size when loading: 2,440 mm × 1,220 mm Maximum panel size when loading: 4,200 mm × 1,600 mm Maximum gripper opening: 110 mm Number of grippers for longitudinal stop: 5 Number of grippers for cross stop: 8 Feed speed of saw carriage: 5 to 100 m/min Feed speed of pushers: 1 to 40 m/min Return speed of pushers: 60 m/min MACHINE DETAILS Control system: G-DRIVEAXS BASIC Main motor output: 18 Hp 13.2 kW Number of front aligners (longitudinal area): 3 Number of side aligners (crosswise, lower): 2 Number of side aligners on pressure beam: 2 EQUIPMENT Left-hand configuration Side conveyor belt for loading

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available Hsdpjxg Ix Ssfx Afiofn - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: used, machine/vehicle number: 007924, Position 1: Panel Feeding and Loading BARBERAN-RFU-4-C-1700 Position 2: Brushing Machines BARBERAN-RFU-4-C-1700 Position 3: Calender BARBERAN-RFU-4-C-1700 Position 4: Gluing Machine BARBERAN-RFU-4-C-1700 Hfedpfx Aewu Agcjfien Position 5: Continuous Cycle Presses BARBERAN-RFU-4-C-1700 Position 6: Panel Stacking and Offloading BARBERAN-RFU-4-C-1700

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8011510B, filter area: 72 m², production capacity: 80,000 unit/h, Equipment: CE marking, TECHNICAL DETAILS Capacity: 80,000 m³/h Number of filter bags: 384 pcs Filter length: 2,500 mm Filter diameter: 230 mm Filter area: 72 m² MACHINE DETAILS Connected load: 15 kW Weight of upper section with motors: 4,000 kg Weight of intermediate section with filter sleeves: 4,000 kg Weight of lower section with legs: 2,000 kg Main fan: 12 pcs Power of main fan: 15 kW Hfedpfx Aexmgtzsfion Nominal air flow: 22 m/s EQUIPMENT Return lines Control cabinet CE marking Extinguishing system Control cabinet Shaking system Vacuum installation Note: The machine has already been dismantled.

Year of construction: 2006, condition: excellent (used), Swing angle 135 Motor 1.1 kW table height 860 mm table surface 800×1000 mm spindle dimension 28 x 90 mm Hfodpehr D Aysfx Afien spindle speed 1500 rpm with feed unit: Fields S/308, year 2011 and accessories

Condition: used, bore capacity in steel (diameter) // mm Hfedpfoxn Aqrjx Afisn throat / mm bore stroke / mm ABARBOGA MASKINER GSMK6012 Drill press WITHOUT VISE

Condition: used, Year of construction: 2016, unused - like new Airflow: 5500 m³/h Power: 2.0 kW Extraction area: 3.2 m² Negative pressure: 920 Pa Dimensions: 2770 x 800 x 1860 mm Weight approx.: 195 kg Storage location: Supplier Hsdpfx Ajxn Ammofisfn

Condition: used, Year of construction: 2003, machine/vehicle number: 0-202-07-6152, Homag Optimat KFL525/8/A3/15 Double Sided Edge Bander (2003) Hfedpsxny Ubsfx Afien

Condition: used, machine/vehicle number: 007655, Position 1: Angular Beam Panel Saws HOLZMA + BARGSTEDT-PROFI HKL + TSP Hfjdpfxswuz Irs Afijn Position 2: Panel Stacking and Offloading HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 3: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 4: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100001570, travel distance Z-axis: 180 mm, table width: 1,620 mm, table length: 5,510 mm, rapid traverse X-axis: 56 m/min, rapid traverse Y-axis: 56 m/min, TECHNICAL DETAILS Processing table dimensions (L x W): 5,510 x 1,620 mm Z-axis travel distance: 180 mm Maximum vectorial rapid traverse speed X/Y-axis: 56 m/min Spindle unit speed: 4,000 rpm Tool changer slots: 44 Connection diameter: 250 mm MACHINE DETAILS Dimensions & Weight Dimensions: 9,700 x 5,020 x 2,650 mm (LxWxH) Net weight: 5,000 kg Spindle unit motor power: 5.5 kW Air consumption: 4,430 m³/h Air velocity: 25 m/s Voltage: 400 V / 50 Hz EQUIPMENT PRO-Speed safety system TEPCAD control panel with touchscreen color display Linear tool changer TBR14 Linear tool changer FAST14 Air blower on the electrospindle XY-axis safety guard Vacuum pump 150/300 m³/h 5-axis unit ‘JQX’ version 13.5 kW Fixed pedestal: 145 x 145 H=75 mm Hedpfoxmgr Rsx Afiefn Rotatable gondola: 145 x 55 H=75 mm Clamp for 8 rails TV FLEX / TV FLEXDRIVE / TV FLEXMATIC MULTIGRIP 90 round clamp (H83) for TV FLEX / TV FLEXMATIC Maestro connect 1 year (including Gateway Kit plug & play) SCM DIGITAL SOLUTIONS: MAESTRO CONNECT MAESTRO ACTIVE software for human-machine interface (HMI) Maestro software for CNC programming Hardware key for Maestro CNC Advanced Maestro 3D module Additional key for Maestro CNC (USB connection) Windows 10 embedded 64-bit operating system Console with integrated PC eye-M PRO

Condition: excellent (used), CATALOGUE NUMBER 6651 TECHNICAL DATA - max. width of the processed element 220mm - max. height of the processed element 120mm Hfsdpeh Up Ipjfx Afisn - 4 spindles: 1) horizontal lower 220mm 4kW 2) vertical right 120mm 4kW 3) vertical left 120mm 4kW 4) horizontal upper 220mm 5.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 4 input rollers, pulling, toothed, including 2 double - 1 output roller, pulling, smooth, rubber, from above - rubber output roller, pulling from below - pneumatically pressed rollers - feed on Cardan rollers - feed motor 1.1kW - lifting motor 0.37kW - electric adjustment of planing thickness - length of the feed plate 1980mm - side pressure - smooth regulation of feed speed 8-16m/min - central lubrication - diameter of the exhaust port 5x140mm - closed in the cabin - dimensions length/width/height 3400x1500x1700mm - weight approx. 1670kg Net price: PLN 39900 Net price: EUR 9390 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of greater exchange rate fluctuations the price may change)

Condition: used, Year of construction: 2015, Worktable: 1945 x 575 mm Max. spindle projection above table: 130 mm Usable spindle length: 100 mm Max. tool diameter (lowerable): 180 mm Spindle arbor diameter: 30 mm Spindle speeds: 3500/7000/10000 rpm Motor power: 5 kW Weight: approx. 240 kg Extraction diameter: 2x 120 mm Storage location: Supplier Hfsdpfxjxn Al Ns Afisn

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Hjdpfxowuz Dgs Afijfn

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 213-051, cutting width (max.): 400 mm, wheel diameter: 860 mm, TECHNICAL DETAILS Saw blade type: Horizontal Saw wheel diameter: 860 mm Maximum cutting width: 400 mm MACHINE DETAILS Model: Hhepunkt HP-400 Year of manufacture: 2018 Serial number: 213-051 Motor power: 22 kW (30 HP) Hfedpfx Afexmgq Toisn EQUIPMENT Conveyor belt (in poor condition)

Condition: used, machine/vehicle number: 007466, Position 1: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Position 2: Brushing Machines SUPERFICI-BRAVOROBOT P1 Position 3: Spray Robots SUPERFICI-BRAVOROBOT P1 Position 4: Ovens SUPERFICI-BRAVOROBOT P1 Hfedpfxowu Aa Ns Afisn Position 5: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Position 6: Roller Conveyors SUPERFICI-BRAVOROBOT P1

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Hsdpfxjwuzzro Afisfn Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI

Condition: used, machine/vehicle number: 007662, Position 1: Panel Feeding and Loading STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 2: Panel Turning Device STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 3: Double Sided Squaring/Edgebanding Machines STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 4: Panel Turning Device STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 5: Panel Stacking and Offloading STEFANI + MAHROS-EVOLUTION SSB + RUNNER Hfsdpfowuzzfjx Afion

Condition: used, machine/vehicle number: 007328, X axis working area: 3200 mm Y axis working area: 1850 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Hfsdpfxsxmgybe Afisn Number of controlled axes: 3 axes Number of controlled axes: 3 axes Total number of drilling spindles: 31 Total number of tool changer positions: 10