Condition: used, Year of construction: 1972, Technical details: wire diameter - max.: 12 mm wire diameter - min.: 2,0 mm control for program: Process Controler Total power requirement: 18,5 kW Weight approx.: 10,5 t dimension machine xH: 2,6 x 1,8 x 2,7 m dimensions LxWxH: Schmiermittelanlage: 0,6 x 0,4 x 0,8 m dimensions electric cabinet LxWxH: 0,5 x 1,2 x 2,1 m dimensions of coil: 2,6 x 1,8 x 2,7 m WRAIGHTING AND CUTTING MACHINE from the manufacturer Wafios-Hack Dusliju Ic Hnopb Iuot Also called spring coiling machine, for the production of right and left hand tension / compression springs. Feed length 17400 mm Spring Ø 120 mm Output range: Yield 1 - 70 pieces/min. Spring Ø 25 - Ø 200 mm Wire thicknesses round steel Ø 5.0 - 140 mm and square steel 5.0 - 12.5 mm Feed speed - spring length max. 42,000 mm and wire feed F1= 40 m/min. + F2= 28 m/min. + F3=20 m/min. currently mounted on the machine: 6 feed rollers for wire intake Ø 4 mm to produce the end product: tension spring wire Ø 4 mm, outer Ø 34 mm and length at 135 mm Operation via control panel, Process Controler BRANKAMP Equipment: Lubricant system Wire reel reel Switch cabinet cooler reel Optional accessories and/or spare parts see photo i.D. *

Condition: ready for operation (used), 1. Decoiler 7 ton - max length: 1550mm - max dia: 1600 mm - internal dia of coil: 455 530 mm - including coilcar 2. Leveller + slitting + cut to length - 4 levelling rolls - max width: 1550 mm - 7 slitting heads electricaly adjustable! - max cap: 2 mm - power: 14 kW 3. Table 4. Recoiler 7 ton - max width: 1550 mm - 19,8 kW power - internal dia of coil: 508 mm - including coil unloading arm 5. Scrap rewinder - max cap: 100 kg Duslipewhryxsb Iuet 6. control unit

Year of construction: 1976, Condition: ready for operation (used), Wire diameter range: 6-10mm, dies: 4, steps: 7, cut-off length: 75mm, underhead shank length: 50mm, max. width across flats: 17mm, max. thread length: 50mm, production capacity: 285 pieces/min, pressing force: 110t. Documentation available. An on-site inspection is possible. Dujlipbewihzbo Iuet

Condition: excellent (used), Year of construction: 2020, High capacity, Fully Automatic Engineered Mesh Welding Plant SUPERWELD Longitudinal wires diameter 6.0 mm – 13.0mm* Dolipb Iswig Exjujut Number of longitudinal wires 39 Cross wire diameter: 6.0 mm – 13.0 mm* *Rebar real diameter Φ must not exceed 13mm !! Mesh width: 3.800 mm Mesh length min 1.000 mm – max 10.000 mm Longitudinal wires pitch at 100mm Cross wire Step min 50mm Cross wire overhang 50mm – 150mm adjustable Power transformer welding 10 x 420 kVA Welding Speed of the machine at wire thickness 6x6mm, mesh spacing 100x100mm and 2150mm will reach 130 strokes.

Condition: like new (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 070425/2007/03, type of input current: three-phase, total width: 1,300 mm, total length: 1,750 mm, total height: 2,600 mm, A practically unused Simco SEG 450 is now available for purchase. This machine is in excellent Dolipbsvwlmfo Iusut condition, having been operated for only approx 100 hours. New price to day is 105 000 EUR It serves as an invaluable tool for spring manufacturers requiring precise grinding of spring ends. The machine operates on a down feed mechanism, ensuring exceptional precision and versatility. Additionally, it is equipped with a 40-line spring edit program and PLC for both rough and fine grinding, enhancing its utility in spring manufacturing processes. High Precision Grinder, Auto Length Checking, Labor Saving

Condition: good (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 122.ES.98, Reinforcement mesh welding machine VIDA For production of welded reinforcement meshes Producer of the equipment: VIDA VRES Year of production: 2002 Status: in working order / operational  1.Main technical properties 1.1. Working dimensions Width of mesh (length of transverse rib) max min 2400 mm 1500 mm Length of mesh (length of longitudinal rib) max min 6000 mm 3000 mm Distance between longitudinal rods (between center axes) max 2400 mm Longitudinal cell size 150 – 200 mm Transverse cell size 50 – 200 mm Diameter of longitudinal rib 5.0 – 10.0 mm Diameter of transverse rib 5.0 – 10.0 mm Longitudinal indentation In beginning At the end 25 – 200 mm 100 – 200 mm Transverse indentation 10 – 400 mm Number of longitudinal ribs max 16 pcs 1.2. Data on connections and consumption Information about connections and consumption is informative. More exact calculations are to be made after clarification of technical and commercial questions. 1.2.1. Electric current Three-phase current 400V, 50Hz Control current 24V Permissible voltage fluctuations of the electrical network ±10% Recommended connection power 600 KW Recommended power for welding in cascading mode ~60 KW 1.2.2. Cooling water Inlet temperature max 25ºС Pressure max 1.5 Bar Supply and return pressure 3.5 Bar Water hardness according to German scale, dH 7-8 Hydrogen ion, pH 7-8 Consumption max 120 l/min 1.2.3. Compressed air Pressure 6 bar Classification of air according to ISO 8573-1 min 5 Air compressor performance 200 l/h Oil and moisture pollution is not allowed, the air should be slightly lubricated 1.2.4. Environmental conditions In accordance with ISO 669-1 Air Temperature +5 - +40ºС Relative humidity 95% 1.3. Production speed and parameters Maximum 90 pcs per minute transverse ribs for 6mm rebar 1.4. Raw material requirements Raw material has to comply with technical requirements for production of spotwelded reinforcement mesh - scale free, grease-free and rust-free. Raw material can be profiled or plain with good welding properties, non-alloy, without impurities, Carbon equivalent not more than 0.4%, tensile strength max 650 N/mm2. Ribs are fed pre-straightened and cut to size on suitable equipment with correct rotating device. 2.Technical specification Dusliswhvvkspb Iuot 2.1. Used reinforcement mesh welding machine VIDA Equipment is to be used for welding of reinforcement mesh. Full set of equipment consists of the following: - Manual loading of longitudinal ribs. Feeder of longitudinal ribs is with pipe gliders; - Welding portal with 8 pneumatic welding presses; - Power of each transformer is 110 KW – 6 pcs (4 pcs new, installed 2019, Sarmata, Italy); - Feeder of transverse ribs is a pre-loading magazine. With help of pneumatic capture they are fed for welding. (see attached video) - Length of flipping table is 6m with Schneider Electric control; - Mesh stacker for mesh up to 6m. - System with thyristor welding! Cabinet of control S7 300 Siemens - Original technical documentation in Italian. - Instructions in English

Condition: used, Year of construction: 1978, Year ca. 1978 für Stangenprofile und... ... für Flachmaterial material thickness max. 24 mm working length 300 - 600 mm efective widths 3 mal 170 mm drive motor 400 V, 11 kW, 50 Hz . +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Delipbjirf Imj Iujut Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1966, shaft length 15 - 130 mm wire diameter 6 - 12 mm length of wire blank max. 170 mm capacity/output with closed mould, adjustable 100 /min capacity/output with open mould, adjustable 67 /min Weight 12,5 t dimensions of the machine (WxDxH) 2,3 x 4,0 x 1,6 m combined double-pressure cold header press for jaws and closed moulds maximum wire diameter for high tensile bolts und carriage bolts 10 mm Delipbsv Sva Ej Iuout maximum wire diameter for mild steel bolts and rivets 12 mm wire diameter range 6 - 12 mm minimum and maximum shaft length 15 - 130 mm maximum length of wire blank 170 mm capacity/output with closed mould, adjustable - 100 St/min capacity/output with open mould - 67 St/min power requirement 15,0 kW mould dimensions - jaw dimensions 54 x 54 mm

Year of construction: 1990, Condition: ready for operation (used), A Hatebur cold former for wire processing is available. Wire diameter range: 6mm-14mm, dies: 4, steps: 5, cutting length: 125mm, underhead shank length: 15mm-102mm, max. width across flats: 17mm, production speed: 120 pieces/min, pressing force: 100t, machine weight: approx. 12000kg. An on-site inspection is possible. Doliewihy Ropb Iuout

Condition: used, Year of construction: 2015, x-travel 550 mm y-travel 350 mm z-travel 400 mm U-travel 550 mm V- travel 350 mm volume 1200 L Dolov Dmqfoipb Iuout material diameter: round 1.200x700x400 mm workpiece weight 1.500 kg inclination +/-30°/400 mm ° thread dia. 0,10-0,33 Bobbin Weight max. 25 kg EDM TIME 21.196 hours.

Condition: good (used), Aceti Beveling Machine Good condition, fully functional, can be inspected and tested on site. Shipping also available abroad. Inspection: To avoid any misunderstandings, I would like to point out that the item can be inspected and tested under power before purchase. Please ask questions before purchasing to avoid any confusion. For general questions or to schedule an appointment for an inspection, you can contact me at any time at the telephone number below or above. Errors in the description and subject to prior sale excepted. Dujlipov Nw Raeb Iust VAT is shown separately on my invoices. Shipping via freight forwarder.

Condition: ready for operation (used), This line can process cold-rolled plate / hot pickled plate / hot galvanized plate / electro galvanized plate / prepainted sheets minimum thickness: 0,3 mm Endproduct: - min/max length: 300/6000 mm - productioncapacity 300 mm 4000 pieces per hour - productioncapacity 6000 mm 1000 pieces per hour - total installed power: 500 kW Line consists of: 1) Soenen 4 armed coilholder Type AL1600/27/4 - max cap per arm: 27 ton - speed: 1 turn per minute - opening hook: 190 mm - power: 2,5 kVa - weight: 26 ton 2) Soenen coilwagon Type HH27 - max cap: 27 ton - max lifting height: 800 mm - min outside dia: 508 mm - displacement: 15 meter - displacementspeed: 8 m/min - turning speed: 10 m/min - weight: 8,6 ton 3) Soenen Decoiler Type AM1600/27V - max cap: 27 ton - min/max width: 250/1600 mm - min/max outside dia: 508/2000 mm - min/max inside dia: 480/520 mm - max decoilingspeed: 100 m/min - weight: 21 ton 4) Soenen feeder rolls + shear Type PR1600 - min/max width: 250/1600 mm - min/max thickness: 0,3/4 mm - dia of rolls: 160 mm - speed: 20m/min - weight: 3 ton 5) Pit 6) Soenen Puller Type 2VR1600EE - min/max width: 250/1600 mm - min/max thickness: 0,3/4 mm - dia of rolls: 95,5 mm - productioncapacity 500 mm 4000 pieces per hour - productioncapacity 6000 mm 1000 pieces per hour - max speed: 150 m/min - weight: 5,8 ton 7) Soenen high speed mechanical shear Type CGM4-16 - min/max thickness: 0,3/4 mm - 6 mm st37 - max length: 1600 mm - cuttingangle: 1° - 200 strokes per minute - interchangable cassette with cuttingknives - weight: 7,6 ton 8) Soenen outfeed - speed: 170 m/min - width: 1600 mm - length from cuttingline: +- 7000 mm - weight: 4,2 ton 9) Soenen Outfeed conveyor Type TB1,6 x 7 - width: 1600 mm - length starting from cutting line: +- 7000 mm - speed: 170 m/min - power: 2x 15kW Delipbowdy Sbe Iujut - weight: 4,2 ton 10) Soenen Stacking unit Type MTB1,6 x 3D - min/max width: 250/1600 mm - min/max length: 300/6000 mm - min/max thickness: 0,3/4 mm - max stackingcapacity: 4000 pieces/hour - transportspeed: 180 m/min - weight: 21 ton Workwidth x sheetthickness: 1600 x 4 mm Straightner: no Shear: yes

Condition: used, Year of construction: 2000, pointing milling machine für Stangen carbide turnover plates 4 Stück Dolog Akgtoipb Iuout working area Rund, Profil+vierkant mm working range 80 (100) an 25 mm milling drive 380/420V, 18,5 KW, 50 Hz kW revolutions per minute Fräsantrieb: 1465 U/min . clamping devices hydraulic pneumatic hydraulisch infeed device hydraulisch ca. 5 lfdm x 300 mm hydraulic power unit Rexroth tank 250 l coolant tank mit Spänekasten l switchgear cabinet mit Klimaanlage control SIEMENS S 7-300 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, Year of construction: 2023, machine/vehicle number: P7YXXX, SINC Razzoor Series cable granulator is advanced-level cable and electronic waste recycling machine, with the compact design the machine becomes mobile, it can be easy moved to other locations and works like plug and play machine. Delipbjhukfms Iuout The machine is equipped with all needed to work independent, just supply the electricity and you can start to recycle your cable or electro waste, for to separate the coper, metals, lead or other ferrous or nonferrous metals from the plastics.

Condition: good (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 500702, wire diameter: 13 mm, machine under of power , ready to work , net price , machine have only 1 set tooling and decolier , machine can bending wire 13 mm Djlipjvln Tqsb Iusut

Year of construction: 2000, Condition: like new (used), Second-hand machine which has never been used, YOM: 2000. Only the straightening part of the machine is available, thus, no the cutting system, neither the bank to receive cut parts (this can be purchased by the maker : Vitari). Capacity 4,0 mm max. Dueljim Ittjipb Iujt

Condition: like new (used), Year of construction: 2021, Wafios BM 36 HS with bending after cutting. CNC wire bending machines for wire diameters from 1.5 mm to 6 mm. The machine is equipped with an additional "bending after cutting" function. Duslowf D Ebsipb Iuet The machine is in mint condition and has only been operated by qualified personnel. The machine is available immediately. Or we have a BM43HS with chamfering, built in 2021 or a BMU 50, built in 2021. Please contact us at this number.

Year of construction: 2022, Condition: new, machine/vehicle number: 5Y22XXXXXX, Our cable stripping machinery are the ideal solution to recycle your scrap cable and we offer STANDARD, HEAW and INDUSTRIAL type of machinery. Your needs will be completed in al/ range of cable size and type. Dslipbeh Uug Uj Iusut Especially in some cases, it is even more economic to strip cable, instead of using cable granulators; our sales engineers are available to give you consultancy about machine and method, suitable for your cable recycling.

Condition: new, This wire and strip bending machine, equipped with 8 Yaskawa motors and Windows PC numerical control, is perfect for manufacturing large parts in 2D or 3D. Dslipopiucxjb Iuout The advantages of this equipment include low tooling costs, easy programming, low maintenance costs, reliability and dimensional repeatability of the parts produced.

Year of construction: 1985, Condition: ready for operation (used), Compression spring making machine. Most of the Schenker range of machines, as well as some Bamatec equipment is available with us. Dolijf I Uumjpb Iueut

Condition: as good as new (ex-display), Manual Coiling comp-ext-tor Spring Machine Dujlipji Ik H Ijb Iuet

Condition: new, Ø2.0mm/2-Axis compression spring machine. Cam-driven. Duelislf Ek Depb Iuot

Condition: new, Cam-driven spring forming machine. A well-proven machine which each spring manufacturer should have in its spring shop for one the best ratio 'price / quality of production' on the market. Duolipb Ioi Ik Hreust

Year of construction: 1984, Condition: good (used), Bihler RM 40 (1984) - Multislide punching stamping bending former Machine is shown with 5 slides, however, a 6th one is available. Several pay-offs for strip or for wire are available. Machine with 8-tons press and 5 or 6 slides - hydraulic clamping for wire or strip. One machine if fitted with a additionnal feeding system from the back of the machine, thru the center hole Dusljh T Ulyoipb Iujt

Condition: new, This wire and strip bending machine, equipped with 8 Yaskawa motors and Windows PC numerical control, is perfect for manufacturing large parts, up to 1 m per dimension, in 2D or 3D. The advantages of this equipment include low tooling costs, ease of programming, low maintenance costs, reliability and dimensional repeatability of the parts produced. The contained price, with a motorised reel with a 1 tonne load capacity and 10 tool sets, is less than €100,000. We are presenting this machine in our Montpellier showroom (south of France) . Djlipsphpgbob Iusut