Condition: good (used), Year of construction: 2021, operating hours: 1,960 h, Functionality: limited functionality, overall weight: 198 kg, total length: 1,750 mm, total width: 1,065 mm, total height: 2,290 mm, The hydration chambers system comprises four separate and independently controlled, sealed chambers, all of which are controlled by a single Eurotherm T2750 programmable automation controller and Eurotherm Eycon20 Visual Supervisor. The software used for programming both the T2750 and Eycon20 is LIN tools, a multi-purpose Windows-based package for use both off-line and on-line. Operation Manual, Technical details and electrical drawings available upon Request Notes - 1. 2 units available 2. Price mentioned is Ex works. Any expenditures incurred for packaging and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. Dujb Hn Tjvmi A Aoq Est The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: excellent (used), Functionality: fully functional, GRUNDFOS GMBH Pump, pre-assembled, A98100625P11635, CRI5 7X CA I E HQQE Model: A98100625P11635 Deb Hnowifm Ij Tq Esut Type: CRI57XCAIEHQQE Condition: Used Technical specifications: 60 Hz 3 kW General: Upper part: 98860989 Grundfos MG100LC2-28FT130-H3 Protection class IP 55

Condition: used, Year of construction: 1993, Manufacturer: Guinard Centrifugation (Andritz) Model: D5LP50HBIL Year: 1993 Type: Decanter / centrifugal separator Previous use: sludge Nominal speed: 2700 rpm – Maximum: 3200 rpm Nominal diameter : 520 :mm Deb Hovlyquon Tq Eeut Power : 45 KW Output extraction / pumping system Inspection report 12,000 H : available (29/01/2021)

Condition: used, Technical details: suction stud diamter: 380 mm filter surface area: 610 x 660 + 560 x 470 + 570 x 470 mm total power requirement: 4,0 kW dimensions L x W x H: 0,6 x 1,1 x 2,2 mm Dsb Hn Tqou Nwwde Eeut - 2x suction nozzles at the bottom left/right: Ø 300 x 200 / Ø 200 x 170mm - exhaust air outlet W x H: 280 x 145mm - 3 pieces slide-in filters - with wall fixation *

Condition: used, Used GEA Westfalia model HSB-300-06-777 stainless steel disc stack centrifuge. Inlet feed 1.16kg/dm3 & heavy liquid 1.30kg/dm3. Maximum rated 4,800rpm. Unit includes stainless steel collection pot, used Seepex pump, control cabinet.. Unit is driven by 75kw, 1486rpm, 400volt, 3/50 electric motor. Dsb Hn Tqowhzb Es Eout

Condition: used, Used vertical stainless steel AISI 316L aseptic pressure storage tank with a total capacity of 830 l by Schwarte-Milfor Sp. z o. o. (Poland) type Mieszalnik procesowy. Duob Hn Terc E E Aoq Est Tank has a working volume of 700 l and is designed to operate at pressures ranging from -1 to 4 bar and temperatures up to 150 C. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 152 l and is designed to operate at pressures ranging from -1 to 3 bar and temperature up to 150 C. The jacket is insulated with mineral wool and clad with AISI 304 stainless steel sheet. Internal dimensions: diameter 850 mm, length of straight wall line 1,200 mm. The tank has a welded dished top equipped with an inspection manway with an internal diameter of 450 mm and 9 stub pipes with mounted accessories. The tank has a welded dished bottom head equipped with a central outlet with a NovAseptic valve type NA and 2 stub pipes with mounted accessories. The machine is mounted on 3 legs equipped with tensions cells with a display. The equipment includes full technical documentation of the manufacturer and UDT in polish.

Condition: used, Used stainless steel cutter/mill by Urschel Laboratories (USA) Comitrol Processor model 1700. Machine is designed for size reduction of free-flowing, dry and semi-dry, products and is equipped with microcut head. Urschel Comitrol Processor 1700 is able to work on three types of heads - slicing head, cutting head or microcut head. Machine is driven by 22,3 kW, 2955 rpm, 380 V, 50 Hz electric motor. Cutting chamber is sealed and deters escape of dust, vapor and liquid. Includes switchboard and control panel. Dimensions are approximately 1300 mm length x 900 mm wide x 1800 mm high, weight approx 500 kg. Dusbjrdgxbe Hn Tq Ejt

Condition: used, Used Brogtec (CH) model MH-8 stainless steel homogenizing mixer. Mixer has total volume of mixing chamber 10 l and working volume about 8 l. Tank is rising and lowering manually. Has bottom discharge outlet and possibility to discharge by manual tilt. Working pressure range - mixing chamber from vacuum till 29 PSI (2 bar). Heating jacket up to 43 PSI (3 bar). Working temperature range - mixing chamber from 32 - 250 F (-1 to 120 C). Heating jacket - from 89 - 250 F (31 - 120 C). Mixer is equipped with anchor with wall scrappers type agitator, vertical ribbon agitator and hi-speed homogenizing mill. Anchor and ribbon agitators are driven by gearbox and el motor 0.3/0.44 kW, 1660/3260 rpm, 460 V, 60 hz. Working rotation of vertical ribbon agitator is about 124 rpm, working rotation of anchor agitator - up to 62 rpm. Hi-speed homogenizing mill is belt driven by el motor 0.3/0.44 kW, 1660/3260 rpm, 460 V, 60 hz. Working rotations from 2755 up to 5379 rpm. Mixer is equipped with local vaccum pump and heating device by GMK type teco 60. Machine has local control panel. Dsb Hnjrdgyvs Tq Eout

Condition: used, Used stainless steel conical mixer-dryer by Hosokawa Micron type 3-VDC-22. Total volume 798 l, working volume 300 l. Drying chamber is rated full vacuum. Working temperature up to 80 C. Conical bottom is equipped with heating coil with total volume 46 l, designed for work on pressure 6 bar, at working temperature up to 130 C. Elipsoidal top has inspection manway with diameter 250 mm equipped with bolted lid. Top has heating coil with volume 7,4 l, designed for work on pressure 6 bar, and working temperture up to 130 C. Dujb Hn Tqjrdgzzs Est Dryer has stainless steel unsupported mixing screw driven via gearbox and el. motor 1.5 kW. Rotating arm is designed in stainless steel and driven via gearbox and el motor 0.25 kW. All motors are in Ex design (EExeIIT4). Bottom central discharge via outlet with diameter 200 mm and pneumatically operated ball valve. Last time machine had been working in pharmaceutical industry. Shipping dimensions: diameter 1400 mm x length 3200 mm x weight 800 kg.

Condition: used, Used mixer by Buhler (CH) type SPM-50-HT with butterfly/tri-foil agitator for work on vacuum. Mixer has contact parts designed in non-corrosive steel. Mixing shaft has length about 1750 mm and is equipped with butterfly agitator, with three paddles and external diameter 1040 mm. Top cover is equipped with two pneumatic accutators and fits mixing pans with diameter 1100 mm. Cover can be rised up to 500 mm. Agitator is belt driven by el motor 45 kW, 1470 rpm, 380/660 V, 50 hz. Mixer is hydraulically risen about up to 90 cm. Machine is equipped with local control panel by Siemens with touchpad and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Duobovtqz Hj Hn Tq Eet Working pressure in mixing tank can reach 0.3 bar. Machine had been working on paints. Mixing pan is not included.

Condition: used, Used dissolver by Oliver+Batlle S.A.(ES) type DISPERMIX 50 designed for work on vacuum. Machine has non-corrosive shaft with working length 144.5 cm. Shaft is belt driven by el motor 40 kW, 1470 rpm, 380/660 V, 50 hz. Ex design of motor (ExeG). Mechanical adjustment of shaft rotation. Shaft is equipped with stainless steel toothed disc, with diameter 350 mm. Rising and lowering of agitator in range 110 cm and is driven hydraulically. Dsb Hn Terdg A Ueq Esut Machine has also lid cover, with diameter 108.5 cm, for work on vacuum, raised and lowered by two hydraulical actuators. Together with mixer there are: - vacuum pump Pfeiffer Vacuum model Hena 200, output up to 240 m3/h, driven by el motor 5.5 kW. - stainless steel mixing pan with volume 500 l. Mounted on 4 leg, no bottom discharge outlet. - local control panel integrated with two hydraulic devices.

Condition: used, Used carbon steel jacketed paddle type mixer by Kates (PL) type 2M1.6. Total volume 1700 l, working volume about 1600 l. Mixing chamber is designed for work on pressure up to 0.14 bar in working temperature range from 5 - 40 C. Mixer has mixing shaft with 6 paddles and two rods working close do front walls. Shaft is driven by el. motor 55 kW, 1483 rpm in Ex design, through gearbox with reduction i = 72.71, what gives working rotation of shaft up to 20.39 rpm. Mixing chamber is covered with carbon steel cooling jacket with volume 75 l. Working pressure on jacket up to 0.5 bar at temperature in range from 5 up to 40 C. Mixer has top inspection manway with bolted lid and diameter 500 mm. Central bottom discharge with pneumatically operated valve. Mixer is mounted on carbon steel supporting construction. Dueb Hnjrdg Nds Tq Eot Machine is able to work as Ex II3GcIIA T3 /ATEX. Mixer is equipped with stainless steel electric control panel. Technical documentation included.

Condition: used, Used universal mixer/cutter by Robot Coupe (FR) model R60. Machine has stainless steel mixing bowl with internal dimensions: diameter 45 cm x length of straight side 38 cm. Total volume 60 l. Working output - maximal batch for emulsifing 36 kg, maximal batch for chopping - up to 25 kg, maximal batch on dough (60% hydrated) - up to 30 kg. Machine has bottom driven shaft with three cutting curve knives. Shaft is driven by 11/7.6 kW, 2875/1445 rpm, 400 V, 50 hz el. motor. Working rotation speeds - 1500 rpm and 3000 rpm. Working time cycle adjustable from 1 to 4 minutes. Top is covered with polycarbonate lid, closed on clamp. Missing lid wiper. Manual tilt discharge. Dob Hn Tqsrdgv De Eout Machine is mounted on stainless steel supporting frame. Last time used in food industry

Condition: used, Used stainless steel horizontal twin ribbon mixer by Laska (AT) model ME3000. Machine has internal dimensions of mixing chamber W 1505 mm x L 2005 mm x D 1170 mm. Total volume of mixing chamber 3000 l. Duob Hn Tsvtqlfjq Ejt Working volume in range from 2100 l up to 2400 l, and weight of batch up to 2400 kg. Mixer has twin shafts with welded ribbons. Each shaft is driven by el. motor 11/7.5 kW, 2880/1450 rpm, 380 V, 50 hz, via reducer and chain. Working rotation of each shaft 36/71 rpm. Mixer has top open. Discharge through two front wall outlets, equipped with two lids designed in teflon and operated via hydraulical actuators. Mixer has hydraulical device driven by el. motor 1.5 kW, builded inside supporting pedestal. Mixer is mounted on four tension cells. Machine has connection pipe for feeding liquid inside the mixing chamber during the work. Mixer is equipped with stainless steel lifting/tilt device for work on rectangular containers with volume 200 l and width 655 mm. Lifting device is operated hydraulically. Machine has technical documentation. Last time used in food industry.

Condition: used, Used stainless steel conical mixer by Hosokawa Milacron model DBXE-300R. Total volume 798 l, working volume 300 l. Mixer has top mounted stainless steel unsupported mixing screw, driven via gearbox and el. motor 2.2 kW. Dsbjrdgy Ij Hn Tq Eout Rotating arm is designed in carbon steel and is driven via gearbox and el motor 0.18 kW. Bottom central discharge via outlet with diameter 200 mm and manually operated slide valve. Machine is mounted on three carbon steel legs and is equipped with local control panel. Last time machine had been working in food industry. Shipping dimensions: diameter 1400 mm x length 3200 mm x weight 800 kg.

Condition: used, Used Praj Industries approximately 10m litre/year (approximately 1,211 litre/hour) ethanol recovery system. Includes, pre-heaters, degassifying column, Ethanol distillation column with 20 sieve plates in stripping section and 20 bubble plates in rectifying section, forced circulation reboiler, 2 x main condensers, distillate condensate collection tank, 2 x pre-distillate condensers, pre-distillate collection tank, vacuum pump, scrubber and various pumps, valves, instrumentation and pipework. Duob Hn Tsvtn Uqsq Eot

Condition: used, Used Paques type Biopaq IC Anaerobic Digestor. S Dsb Hovtn Eien Tq Eeut ystem includes main BIOPAQ reactor designed for Internal Circulation, Closed. Approximate capacity 248cumt, approximate height of 23,000mm. System was used for COD components metabolization to biogas (methane & co2) with an approximate efficiency of 90%. System includes recirculation degassing tank, gas flare and associated pumps, valves & instrumentation.

Condition: used, Used Praj Industries approximately 5,000 litre/hr inlet flow furfural recovery system. Duob Hn Tsvtn Evoq Est Includes Furfural distillation column with 20 sieve plates in stripping section and 10 sieve plates in rectifying section, forced circulation reboiler, 2 x main condensers, distillate condensate collection tank, azeotrope side drawn collection tank, Azeotrope cooler, water/furfural tank, decanted raw furfural collection tank, vacuum pump, scrubber and various pumps, valves, instrumentation and pipework.

Condition: used, Used Alfa Laval model GS2-200 stainless steel decanter centrifuge. Bowl measures approximately 280mm diameter. Maximum solid density 3.0kg/dm3. Unit includes main drive motor and back drive. Duob Hn Tqjvtn D Se Eot Includes control panel.

Condition: used, Used Alfa Laval 316L stainless steel 3-effect plate evaporator system. Deb Hn Tqjvtn Iwo Eeut Designed evaporation capacity approximately 28,000kg/hr. 1st & 2nd evaporator effects with rising film evaporators (AlfaVap Plate) model AlfaVAP 650-FL) utilising MVR (Mechanical Vapor Recompressor). 3rd effect (Finisher) with forced circulation (AlfaFlash MX25-MFMS) utilizing hot water as a heating medium. System includes (6) plate heat exchangers, (3) cyclone separator vessels, vacuum pump, various circulation pumps, instrumentation, valves and framework.

Condition: used, Used Winkworth model RT200 stainless steel high speed ploughshare (T-Arm) mixer. Approximate capacity 200 litre (product dependent). Mixing chamber measures approximately 1,000mm long x 650mm diameter. T-Arm ploughshare blades driven by approximately 11kw electric motor/gearbox. Unit includes (1) stainless steel side entry chopper driven by approximately 4kw motor. Unit has centre bottom discharge with valve. Unit also includes (1) Base electically driven tote lifter, maximum capacity 150kgs with (2) stainless steel totes. Dusbom Uydhs Hn Tq Ejt

Condition: used, Used Aeromatic Fielder model MP1 VP approximately 10 litre capacity stainless steel mixer / granulator. Unit has bottom entry 3-blade mixer with drive. Includes side entry chopper. Unit has jacketed removeable bowl. Has local controls. Includes various inserts to reduce bowl capacity. Unit is mounted on mobile base. Dsb Hsmhhpbsn Tq Ejut

Condition: refurbished (used), Perry is offering a high quality, refurbished, used Winkworth model RT400 316 stainless steel high speed ploughshare mixer. Manufacturer: Winkworth Material: Stainless steel Serial Number: 16025 Capacity: 400 litre (product dependent) Mixing trough: 1,300mm long x 800mm diameter Discharge Type: Centre bottom pneumatically operated flap discharge value Type Of Blades: Ploughshare blades Motor: 11kw, 380-415 volt, 3/50, 1450-1460rpm motor through Custom Power Transmission gearbox type MO820, 11kw Dob Hnetz Tkpj Tq Eout Revolutions Per Minute: 99rpm with 14:1 ratio Also includes: (1) stainless steel side entry chopper driven by 4kw, 380-415volt, 2840-2870rpm, 3/50 motor. Refurbishment Shot blasted all mild steel parts and bead blasted all stainless external parts. Overhauled gear-box with new bearings and seals with oil change. Overhauled chopper assembly with new bearings and seals. Serviced packed glands with new PTFE packing. Fitted new flanged bearings on to shaft ends. Re-gasketed chamber, access hatch and valve. Spray painted in our paint booth facility. Reassembled and test run. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.

Year of construction: 1997, Condition: like new (used), machine/vehicle number: 5019538, Used Alfa Laval 4500 series model XMNX 4545 stainless steel decanter centrifuge. Bowl 450/258mm diameter X 1460mm long. Maximum solids density 1.2 kg/dm3. Bowl belt driven by 30 kW motor and gearbox at maximum 3250 rpm. Includes Netzsch type IE 50 BK stainless steel mono feed pump driven by 4 kW motor. Also includes spare stainless steel scroll. Has control panel with electrical panel. Design capacity 16 cubic meter/hour input with 0.5% dry solids and output with 5% dry solids. Mounted on frame with solids collection tank. Dsb Hn Tqegd Dqtj Eeut Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: used, Used Matcon approximately 1,000 litre stainless steel IBC. Unit measures approximately 1,000mm long x 1,000mm wide x 500mm deep with a 500mm deep conical bottom. Unit mounted on forkliftable base. Includes internal discharge cone. Dusb Hnsun Syvj Tq Eot