Year of construction: 2020, operating hours: 1,960 h, Condition: good (used), Functionality: limited functionality, Precision Weighing Modules - 22 units available Max Capacity: 220g Readability: 0.1mg Interface: EtherNet/IP, TCP/IP Dimensions(LxHxW): 200mm x 100mm x 25mm Power: Power Over Ethernet Configuration Software: APW-Link Version2.7.2 Dujb Hl H Iovzl A Uskjt Note - Price mentioned is Ex works. Any expenditures incurred for packaging, handling and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: excellent (used), RENISHAW Measuring System Package: ACR1 ⇒ Automatic changeover system for up to 8 probe modules. ACC2-2 ⇒ Communication between the CMM controller and the ACR1 changeover system. IS1-2 ⇒ Fully automated system for using multiple sensor types connected in parallel. PI7-2 ⇒ Signal processing from the TP7M strain gauge probe and standard touch probes. PI 200 ⇒ Interface for TP200 and standard touch probes. TP200 (x2) ⇒ Probe module with strain gauge technology for high accuracy. Dusb Hl Hswig U Hs Iket TP7M (x4) ⇒ 25 mm diameter strain gauge probe with auto-mount. + MITUTOYO ⇒ Calibration ball Ø 19.9819 mm ceramic, with M8 thread

Condition: excellent (used), Vötsch Type: VC³ 4018 Vötsch Climatic Test Chamber VC³ 4018 Air-Cooled Converted to R452a Technical Specifications: Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Plug-in included in standard equipment R1: ® 125 mm L1: © 50 mm Data for temperature tests: Temperature range: -40°C to +180°C Temperature deviation over time ± 0.1 to ± 0.5 K Temperature homogeneity over space ± 0.5 to ± 1.5 K Temperature rate of change Heating 4 K/min Cooling 4 K/min Max. heat compensation 2300 W Dujb Hlsvpt Ino H Ikjt Data for climatic tests: Temperature range +10 to +95 °C Dew point range -3 to +94 °C Humidity range 10 to 98 %RH Temperature deviation over time ±0.1 to ±0.3 K Temperature homogeneity over space ±0.5 to ±K Humidity deviation over time ±1 to ±3 %RH Heat compensation 400 W Data for operation: Test room lighting: halogen bulb 2 x 24V, 50W 3/N/PE AC 400V±10% 50 Hz Rated power 4.1 kW Rated current 14 A Weight: 470 kg For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Functionality: fully functional, Agilent Technologies Inc. Exerciser Module, N5344A Model: N5344A Condition: Used Duob Hl Hewifkye Ikot Specifications: RDX General: Transparently monitors DigRF v4 bus activity Compatible with: N5345A High-Performance Soft Probe N5346A High-Performance Flying Lead Probe Supports DigRF v4 bus specifications Supports speeds up to 3 Gb/s, with single or multi-lane configuration Full protocol decoding capabilities

Condition: used, Year of construction: 2018, machine/vehicle number: IntNr231039, IntNo231039 Operating hours: not known Bros. KEYENCE_Model series XM_(T2000- still to be checked) Year 2018 Measuring device Measuring range: 300 mm × 250 mm × 150 mm Smallest display unit: Distance 1 µm / angle 0.0001 degrees Measuring accuracy: Repeatability: ±3 μm Measurement deviation: ±8 μm Object table Maximum weight load: 25 kg Debjwh Sa Es Hl H Ikeut Measuring probe: 2 Built-in display: 15-inch LCD monitor (1024 × 768) Interfaces: USB 2.0 Series A: 3 ports Environmental resistance: +10 to +35°C With reference to ISO 10360-2 (within an area of 200 × 200 × 150 mm at an operating ambient temperature of 23 ±1°C) Control unit XM-1600 Measuring probe: XM-P2000 Functions: Setting mode, image-guided measurement, statistics and analysis, single measurement 500 (without comment elements) Basic measurement: Distance, angle, calculation, CAD distance Plane, straight line, point, circle, cylinder, cone, sphere Point - no correction, ellipse, point circle, stepped cylinder, oval, slotted hole, Corner radius, chamfer, torus, CAD comparison, free-form surface Construction: Center point, tangent point, intersection point, perpendicular, numerical input, Element selection, center line, tangent, intersection line, projection line, rotation line, numerical input, element selection, center plane, parallel plane, numerical input, element selection, intersection circle, numerical input, element selection. Test specifications, single object report, single object report (with component image), Screen image, graphic display image, image from the touch probe camera, CSV output Machine dimensions: approx. 900 x 500 x 1000 [mm] Machine weight: approx. 30 [kg] Machine dimensions: approx. 400 x 300 x 600 [mm] Machine weight: approx. 6 [kg] The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved! Used. KEYENCE_Model series XM_(T2000- still to be checked) Year 2018 Measuring device Measuring range: 300 mm × 250 mm × 150 mm Smallest display unit: Distance 1 µm / angle 0.0001 degrees Measuring accuracy: Repeatability: ±3 μm Measurement deviation: ±8 μm Object table Maximum weight load: 25 kg Measuring probe: 2 Built-in display: 15-inch LCD monitor (1024 × 768) Interfaces: USB 2.0 Series A: 3 ports Environmental resistance: +10 to +35°C With reference to ISO 10360-2 (within an area of 200 × 200 × 150 mm at an operating ambient temperature of 23 ±1°C) Control unit XM-1600 Measuring probe: XM-P2000 Functions: Setting mode, image-guided measurement, statistics and analysis, single measurement 500 (without comment elements) Basic measurement: Distance, angle, calculation, CAD distance Plane, straight line, point, circle, cylinder, cone, sphere Point - no correction, ellipse, point circle, stepped cylinder, oval, slotted hole, corner radius, chamfer, torus, CAD comparison, free-form surface Construction: Center point, tangent point, intersection point, perpendicular, numerical input, Element selection, center line, tangent, intersection line, projection line, rotation line, numerical input, element selection, center plane, parallel plane, numerical input, element selection, intersection circle, numerical input, element selection Test specifications, individual object report, individual object report (with component image), Screen image, graphic display image, image from the touch probe camera, CSV output Machine dimensions: approx. 900 x 500 x 1000 [mm] Machine weight: approx. 30 [kg] Machine dimension

Condition: used, workpiece weight 100 kg workpiece length 1000 mm diameter 500 mm centre height 280 mm total power requirement 2,5 kW weight of the machine ca. 1 t dimensions of the machine ca. 1,6x 1x1,6 m Dsb Hl H Iov Nq Swskeut

Condition: like new (used), machine/vehicle number: ML170mm 1554142W, Dr. Johannes Heidenhain Glass scale ML170mm 1554142W LS903 IdNr. 20908102 Length measuring device Scale Manufacturer: Heidenhain Type: ML170mm 1554142W IdNr. 20908102 For further technical data, please refer to the type plate in the attached photos. Otherwise, please note the following information and call us if necessary. Thank you very much. - Condition: please see photos, the item was stocked as a spare part, comes from the spare parts warehouse or was dismantled from an existing system. - Further information: Please note that the item may have already been used. Some scratches, stains, discolorations or cable harnesses may therefore still be present. - The item is offered as used, without any guarantee or warranty. Duob Hl H Ijvakg Njkot - Some of our items have been dismantled from functioning production systems or are unused stock items, - Items have been in storage for several years and are expressly offered as "used goods", even if they have hardly been used or have only been kept in stock as spare parts. - Deviations from technical data and errors in the description of the item may occur and are reserved. - Condition/packaging as shown in the photos or according to individual agreement. - For further questions or request for more photos please contact us. - For shipping abroad, please inquire, as shipping costs vary. - For technical or other queries please contact us at any time. - Appointments for viewing or collection are of course possible by arrangement. If you have any questions or would like to arrange a viewing, please contact us. Thank you for your interest.

Condition: used, Technical details: measuring range X-axis: 3000 mm indexing: 0,1 mm weight: variable kg Dueb Hl H Isu N Atwokjt No. 1 Caliper/caliper gauge made of stainless and hardened steel Make INOX Measuring range 0 - 3000mm Reading 0.05mm via vernier Leg length approx. 280mm without measuring tips for internal measurement No. 2 Caliper/caliper gauge made of stainless and hardened steel Make Massi according to TGL Measuring range 2000mm Reading 0.1mm via vernier *

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone. Dobswh Ttms Hl H Ikeut

Condition: used, Functionality: fully functional, Rohde & Schwarz Universal Protocol Tester, 1138 4000 82, CRTU RU Model: 1138400082 Type: CRTURU Condition: Used Dueb Hl H Iowifhfokjt

Condition: good (used), We offer for sale a Heraeus heating and drying oven. Heraeus heating and drying oven manufacturer HERAEUS Type: 6200 condition: Used in good condition air mixing oven: up to 250°C Internal volume: 180 liters temperature controller and timer air mixing voltage: 2800watt 1 phase 230volt 50Hz 12.3A IP20 External housing: width 800 mm, length 890mm, height 810 mm. Dujb Hljvzqyfj H Ikjt Internal dimensions: width 510 mm, length 550 mm, height 650 mm weight: 100kg

Condition: good (used), Smoke extraction hood with burner, gas furnace, laboratory furnace, kiln Dusb Hl Hjwhbgzo Ikst -Smoke extraction hood: with burner, without extraction fan -Interior: W/D/H 690/400/580 mm -Accessories: see photos -Dimensions: 730/425/H1015 mm -Weight: 71 kg

Condition: good (used), measuring range X-axis: 550 mm, measuring range Y-axis: 750 mm, measuring range Z-axis: 400 mm, total height: 2,400 mm, total width: 1,300 mm, total length: 1,400 mm, overall weight: 1,000 kg, - Measuring plate: Granite measuring plate, dimensions: 880 x 830 mm Dsbov Tdaco Hl H Ikeut - Software: MCOSMOS

Condition: used, - Location: Bremen - Other The multi N/C pharma UV is a compact instrument for safe and precise TOC determination in pure and high purity waters. It is in accordance with the requirements of the Water Monograph of the European Pharmacopeia Commission and the Monograph of the United States Pharmacopeia Convention (USP) and is particularly suitable for water monitoring in the pharmaceutical industry, but also for water monitoring in the semiconductor industry. The multi N/C pharma UV operates on the principle of wet chemical UV oxidation in combination with a particularly precise and CO2-selective NDIR detection. Duebohzxizo Hl H Ikot Various technical documents as well as operating instructions in English.

Condition: used, Heraeus Vötsch Type: VT 7010 Air-Cooled Temperature Test Chamber Djb Hlowhmdre H Ikeut 100 Liter Test Chamber Volume Housing Dimensions: Width 820 mm, Depth 840 mm, Height 1670 mm Internal Dimensions: Width 550 mm, Depth 350 mm, Height 550 mm Temperature Range -70°C to +180°C Temperature Deviation Temporarily ± 1 K Temperature Deviation Spatially ± 2 K Side Feedthrough 80 mm ∅ 80 mm ∅ Refrigerant: R-404A / R-23 Voltage: 1/N/PE AC 230V ±10% 50Hz Rated Power 3.2 kW Rated Current 14.5 A Weight: 260 kg For your safety, please note the following information as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Robust universal hardness tester suitable for Rockwell, Vickers, and Brinell measurements. Sturdy machine stand designed for rugged everyday use. Measuring systems: - Measuring head with ground glass - Rockwell with dial Duob Hl Hswg R The Ikjt Test height 300 mm Test depth 150 mm Hardness tester dimensions L x W x H 610 x 350 x 940 mm, without base frame Machine weight approx. 260 kg

Condition: ready for operation (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 589-8106C, Equipment: type plate available, 1 used Leitz coordinate measuring machine, complete, including measuring table, control PC, various mounts and probes, without transport locks!! The system is located in the measuring room of a development laboratory. Temperature 20.8 +-0.1°C. Dobswihfme Hl H Ikout It is connected and running, but is no longer in use. Delivery date approximately 6 weeks, after clarification. The buyer can remove the upper section to reduce the height. (Leitz service recommended!) The buyer must organize transport and provide transport locks. Machine weight approx. 6,700 kg, L x W/W x H: 2395 mm x 2013 mm x 3026 mm ----- Please state your offer price. Sale only within the EU, Switzerland, Turkey, and the United Kingdom ----- For technical data, see handout. Without packaging; any warranty claims are excluded. If you wish to disassemble the system yourself, please provide appropriate information in your bid. We assume no liability for the accuracy of the technical specifications, the completeness of accessories and tools, or compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Year of construction: 2014, Condition: good (used), Functionality: fully functional, machine/vehicle number: 133114, 1000L climate chamber Dob Hlowif N No H Iksut Temperature range -70°C to +180°C Humidity control 10-98%

Condition: excellent (used), Year of construction: 1999, Mitutoyo Euro C9166 Apex Measuring ranges 900x1600x600mm Accuracy 2,9 + 4L/1000µm Software selectable: Dusb Hehtqxuol H Ikjt - Mitutoyo MCOSMOS-1 V3 (upgrade V5 for € 4.000,--) - EasyCMM I++ Server plus Inca Professional (€ 8.000) Probe Renishaw PH1 with either: - Renishaw Touch probe TP200 - Renishaw Touch Probe TP20 Selectable options: - Renishaw PH10 (T oder M) - New PH10M or Tplus Head and Probe (upgrade) - Bilz Pneumatic Vibration Damping System on demand Installation & Calibration and software training (plus additional travel expenses) Including 3 Month Warranty on machine and probe (excl. travel expenses)

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 15 h, Functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 300 mm, workpiece weight (max.): 50 kg, warranty duration: 12 months, type of input current: AC, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 300 mm, overall weight: 8,000 kg, input voltage: 230 V, feed length X-axis: 1,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 300 mm, compressed air connection: 5 bar, year of last overhaul: 2024, ambient temperature (min.): 16 °C, Equipment: documentation/manual, lighting, type plate available, Reference measuring device Mahr OMS 1000 Multisensor The all-round measuring device for the widest range of parts Factory overhauled premium multisensor measuring center with guarantee and warranty rebuilt 2022. Incl. latest SW update, 18 months free SW update service, free lifetime SW hotline and user support. Delivery with factory service or forwarding agency, worldwide. Online, optionally on-site demos with customer parts, application technology advice from accredited Profitech measurement laboratories during project planning. Complete service: – Delivery, construction, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual education and training programs can also be booked as online courses. Rent-hire-purchase or financing possible directly via Profitech and without a financial institution. Measuring device individually configurable to customer needs Measuring accuracy: E1= 1.3 + L / 400µm E2= 0.9 + L/600µm E3= 2.2 + L/300 µm Measuring range: approx. 1000x1000x350mm including optical sensor (camera & laser) Renishaw TP200 touch probe including standard force module CNC control incl. manual control panel 27 inch flat screen monitor Dusb Hjhmfb Sol H Iket Evaluation station incl. Windows 10 operating system) New Opticheck 3D 5.0 ​​software active vibration damping (pneumatic) also for production-related measurements Optical sensor: • Pure gray value image processing • Fast digital image processor • Automatic feature and edge filter • Error documentation through program-controlled saving of the video image • Multifunctional multi-window technology • white, telecentric transmitted light • coaxial incident light • 3D multi-sensor head Laser sensor: Laser preparation for laser autofocus. Software intensity control to adapt to different materials. Software: • User-friendly, interactive programming • symbolic representation of the program structure • 32-bit multitasking enables parallel measurement and evaluation • Powerful basic editor for customer-specific programs • automatic sensor calibration • Geometry elements: point, straight line, circle (enveloping, compensating and inscribed circle), ellipse, plane, cylinder, cone, sphere • Geometry functions: intersection, distance, angle, perpendicular, symmetry • Shape & position tolerances: straightness, roundness, flatness, cylindricity, parallelism, squareness, inclination, position, symmetry, concentricity, concentricity, total concentricity, axial runout, total axial runout • Maximum Material Principle (MMC) • Current tolerance tables of common DIN standards • Software module for creating any factory tolerance table

Year of construction: 2022, Condition: excellent (used), White Type: T/800/70/10 Water-cooled External dimensions (HxWxD): 2085 x 1415 x 2810mm Test room dimensions (HxWxD): 950 x 1100x 800 mm Volume: 800 liters Minimum temperature: -72 °C Maximum temperature: +180 °C Temperature change rate, cooling: 12.0 K/min Temperature change rate, heating: 12.0 K/min Temperature deviation over time: ±0.1 to ±0.5 K Dueb Hl Hjvxrwgs Ikst Temperature homogeneity spatially: ±0.5 to ±2.0 K Temperature gradient: ≤2.0 K Heat compensation, at +20 °C: 8000 W Power connection 3/N/PE AC 400 V ±10% 50 Hz or 3/N/PE AC 440 V ±10% 60 Hz Rated power: 30 KW Rated current: 57 A Operating hours: approx. 10 (never used) Condition: used Weight 1600 kg Scope of delivery: (See picture) Sold ex location! (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2018, Functionality: fully functional, - Specially configured automatic contour measuring device - Mahr Surf LD130 base unit with automatic probe change - Height-adjustable frame - X/Y travel table with clamping device available All clamping devices, probes, measuring programs, etc., were specifically procured for a specific product and can be modified with the manufacturer's assistance. Pickup at our Haldensleben location Dueb Hl Hswictls Ikjt Immediately available

Condition: used, Measuring range 16 mm Angle 60 ° Dsbowg Hp Es Hl H Ikjut weight 500 gr

Year of construction: 2017, Condition: good (used), Functionality: fully functional, machine/vehicle number: 173054, A used climate cabinet from CTS is for sale. Inspection and test run possible in advance. Djb Hl H Iovrffqokjut

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,000 mm, Measuring Range X – axis 1200 mm Y – axis 2000 mm Z – axis 1000 mm Accuracy acc. ISO 10360 E = [2,6 + 4L/1000]µm DCC controller Renishaw UCC S5 JS box Renishaw MCU-5 (wireless on demand) Temperature sensor Renishaw Probe system Renishaw REVO 5-axis scanning probe Deb Hl Hjdv I Abe Ikout Probe changer Renishaw (price REVO system new appx. € 80.000,--) Application software Inspect3D Inca V6 avzula version built 2014, retrofit 2017 with Revo